Terminator 2 Hunter Killer Ship Protector
We made a plastic plate that fits the exact silhouette of a T2 Hunter / Killer ship. It assembles to the metal wire with two extra locknuts, tying the plate and wire into one rigid piece. The ship screws stay a little loose.
This assembly means that the ship shell is no longer locked to the wireform, and no longer undergoes extensive deformation when an airball hits.
|Here's our illuminated version. It ties to GI for power, and the target flashers to trigger the lights. We're working on the patterns: they will change after every few flash groups. The device requires four solder connections under the playfield. Available at Pinbits in April. We'd have been quicker - except there's software, and we had to redesign to work with low-voltage machines.|